Gel cover maintenance and care tips

1. Maintenance guide:

1. After wearing the gel cover every day, wash the residual limbs and gel cover with warm water and neutral washing, for example: PH neutral generation shock washing. Use a cleaning cloth, but don't hold back or rinse hard, otherwise it will damage the gel cover. Rinse it with clean water and dry it with a clean dry towel:

2. After cleaning, dry it in a cool place and do not expose it to the sun to avoid deformation of the rubber sleeve; remember to insert the sponge into the gel when the gel sleeve is not in use. Long-term rolling and placing will cause the gel to crack.

3. Clean the knitted fabric outside the rubber sleeve regularly every week to keep it clean;

4. After wearing the thigh cover on the residual limb, wear one or more layers of stockings or cotton socks outside the rubber cover to avoid the abrasion of the knitted fabric outside the rubber cover.

 

2. Nursing matters of residual limb wearing gel cover:


1. Before formally cutting and taking the azurite mold, you should wear a gel cover on the residual limb for about 5 hours to observe whether the residual limb is unsuitable or the skin is itchy and small red rash. If the above symptoms occur, stop using the gel. set;

2. When wearing the gel sleeve, the inner sleeve should be worn downward from the upper edge of the opening, and wear it in a rolling way to exhaust the air in the inner sleeve as much as possible; roll the gel sleeve all the way to the residual limb, and pay attention to your hands. Do not damage the gel cover with your nails. Don't pull hard.

3. Before the wound with broken skin or pus is healed, Zhe Shi can not wear a gel cover;

4. When the gel sleeve is first worn, patients with more sweat glands will experience large areas of sweating, which is normal.

5. After wearing the gel cover every day, wash the residual limbs on time. Wearers with oily skin or excessive skin secretion should clean the oil on the skin surface.

6. Do not stick the two sides of the gel for a long time, as it is easy to damage the gel when you pull it. The gel will become more viscous after being used for a long time. You can use prickly heat powder to spread evenly on the surface of the gel, which is convenient for wearing and storing.